Panasonic HX-A100 ユーザーズマニュアル
- 20 -
∫ If the connection between this unit and the smartphone has been
interrupted
The connection between this unit and the smartphone may be interrupted temporarily depending on
radio wave conditions.
An attempt to reconnect is made automatically when radio wave interference, etc. is eliminated.
Please note the following.
≥ If you have been recording a motion picture or recording in the [Interval rec mode], the recording
radio wave conditions.
An attempt to reconnect is made automatically when radio wave interference, etc. is eliminated.
Please note the following.
≥ If you have been recording a motion picture or recording in the [Interval rec mode], the recording
will continue even after the connection interruption. To stop the recording, operate this unit.
≥ If Image App has been used in playback mode, if reconnecting takes 30 seconds or more, this
unit turns to recording mode and Image App will run in recording mode after the connection is
restored.
restored.
≥ If this unit has been deleting files, cutting unwanted scenes or formatting, the operation will
continue even after the connection interruption.
Do not remove the microSD card while the Access lamp of this unit lights.
Do not remove the microSD card while the Access lamp of this unit lights.
The clock of this unit is synchronised with that of the smartphone.
Synchronise to adjust the clock, etc.
Synchronise to adjust the clock, etc.
1
Tap
#
[Camera setup].
2
Tap [Date & time].
≥ When you want to adjust the clock, change the time of the smartphone first, and then synchronise
the time with this unit.
≥ It may take approximately 60 seconds to synchronise the time of the smartphone with that of this
unit.
≥ When the built-in clock battery runs down, the clock setting returns to the default state. When the
battery of this unit is in a charged state, the built-in clock battery is also charged automatically. If
you leave the battery in this unit in a charged state for approximately 24 hours, the built-in clock
battery stores the clock setting for approximately 4 months.
you leave the battery in this unit in a charged state for approximately 24 hours, the built-in clock
battery stores the clock setting for approximately 4 months.
≥ The setting range from 1 January 2013 through 31 December 2039 is available for time
synchronisation with the smartphone.
Setting date and time
When you start Image App connecting with this unit for the first time, a message asking you to
set the date and time will appear. (This message will also be displayed if this unit remains
unused for a long period of time.)
Perform Steps 2 below to set the date and time.
set the date and time will appear. (This message will also be displayed if this unit remains
unused for a long period of time.)
Perform Steps 2 below to set the date and time.
Preparation:
Connect this unit with the smartphone and start Image App. (
HX-A100_VQT4X97.book 20 ページ ２０１３年２月１４日 木曜日 午後２時１６分