Panasonic HX-A100 ユーザーズマニュアル
- 35 -
Advanced
This is the connection method for Live broadcasting using the “LUMIX CLUB” and “USTREAM”
services.
≥ Check if the wireless access point is compatible with IEEE802.11b, IEEE802.11g, or
services.
≥ Check if the wireless access point is compatible with IEEE802.11b, IEEE802.11g, or
IEEE802.11n.
≥ Access point settings are required specially for Live broadcasting.
* Only the smartphone compatible with tethering is available.
Connecting this unit with an access point (such as a
wireless router)
wireless router)
Please read the manual of your access point and check if the access point is compatible with WPS.
≥ If your access point is not compatible with WPS, connect this unit with an access point according
≥ If your access point is not compatible with WPS, connect this unit with an access point according
)
1
Press the Wi-Fi/WPS button continuously to
change the Wi-Fi mode lamp to [
change the Wi-Fi mode lamp to [
].
≥ The Wi-Fi mode lamp [
] flashes. (“1 Beep” sounds 8 times.)
2
Press and hold the Wi-Fi/WPS button for
3 seconds or more.
3 seconds or more.
≥ The Wi-Fi mode lamp [
] flashes faster.
3
Press the WPS button of your access point within 3 minutes. (Set to
the WPS standby state.)
the WPS standby state.)
≥ When “2 Beeps” sound 8 times, the connection is completed.
Setting the connection destination for
Live broadcasting
(Connecting in Live broadcast mode)
Connecting to a WPS-compatible access point
*
USTREAM
LUMIX CLUB
HX-A100_VQT4X97.book 35 ページ ２０１３年２月１４日 木曜日 午後２時１６分