Sharp MX-3610N ユーザーズマニュアル
12
NAMES OF PARTS AND COMPONENTS, TURNING ON THE POWER
This machine has a main power switch, found at the
bottom left after the front cover is opened, and a power
button (
bottom left after the front cover is opened, and a power
button (
), located on the operation panel.
CAUTION
• When turning off the power, make sure that the indicators on the
operation panel turn off as well.
• If the machine suddenly turns off, such as in the event of a power failure,
turn the machine on again, and then turn off the machine following the
correct procedure for turning off the machine.
Switching off the main power switch or removing the power cord from the
outlet while any of the indicators are lit or blinking may damage the hard
drive and cause data to be lost.
correct procedure for turning off the machine.
Switching off the main power switch or removing the power cord from the
outlet while any of the indicators are lit or blinking may damage the hard
drive and cause data to be lost.
• Switch off both the power button (
) and the main power switch and
unplug the power cord if you suspect a machine failure, if there is a bad
thunderstorm nearby, or when you are moving the machine.
thunderstorm nearby, or when you are moving the machine.
• When using the fax or Internet fax function, always keep the main power switch in
the “ ” position.
• In some states of the machine, pressing the power button (
) to restart will not
make the settings take effect. In this case, use the main power switch to switch
the power off and then on.
the power off and then on.
Turning on the power
• Switch the main power switch to the “ ” position.
The main power indicator will light in orange. The
power button (
) does not function while the main
power indicator is lit in orange.
• After the main power indicator lights in green, press
the power button (
).
Turning off the power
(1) Press the power button (
) to turn off the power.
(2) Switch the main power switch to the “ ” position.
Restarting the machine
In order for some settings to take effect, the machine
must be restarted. If a message in the touch panel
prompts you to restart the machine, press the power
button (
) to turn off the power and then press the
key again to turn the power back on.
Main power indicator
Output tray (Centre tray)
Keyboard*
Automatic
document feeder
Operation
panel
Right tray
Paper pass unit*
Bypass tray
Front cover
Tray 5
Tray 5
(when a large capacity tray is installed)*
Tray 1
Tray 2
Tray 1
Tray 2
(when a paper feed tray is installed)*
Tray 3
Tray 3
(when a paper feed tray is installed)*
Tray 4
(when a paper feed tray is installed)*
Saddle Finisher*
Main power switch
Power button
Finisher*
* Optional
17
• Do not dispose of used toner cartridges. Place them in a plastic bag and keep them. The technician will collect the used toner cartridges when performing maintenance.
• To view the approximate amount of toner remaining, continually touch the [Home Screen] key during printing or when the machine is idle. The percentage of toner remaining will
• To view the approximate amount of toner remaining, continually touch the [Home Screen] key during printing or when the machine is idle. The percentage of toner remaining will
appear in the display while the key is touched.
• When the percentage falls to “25-0%”, obtain a new toner cartridge and keep it ready for replacement.
• Depending on your conditions of use, the colour may become faint or the image blurred.
• Depending on your conditions of use, the colour may become faint or the image blurred.
MAINTENANCE
When toner runs low, the colour and the message “Prepare a new toner cartridge.” appears.
Prepare a new toner cartridge for the indicated colour.
When toner runs out, the colour and the message “Replace the toner cartridge.” appears.
Replace the toner cartridge for the indicated colour.
Example: Replacing the yellow toner cartridge
Prepare a new toner cartridge for the indicated colour.
When toner runs out, the colour and the message “Replace the toner cartridge.” appears.
Replace the toner cartridge for the indicated colour.
Example: Replacing the yellow toner cartridge
When a paper misfeed occurs, the message “A misfeed has occurred.” will appear in the touch
panel and printing and scanning will stop.
In this event, touch the [Check how to remove misfeeds.] key in the touch panel.
When the key is touched, instructions for removing the misfeed will appear. Follow the
instructions. When the misfeed is cleared, the message will automatically clear.
panel and printing and scanning will stop.
In this event, touch the [Check how to remove misfeeds.] key in the touch panel.
When the key is touched, instructions for removing the misfeed will appear. Follow the
instructions. When the misfeed is cleared, the message will automatically clear.
Old toner cartridge
Shake 5 or 6 times
Gently insert straight
into the machine
until it locks
into the machine
until it locks
Close
Open
New toner cartridge
1
2
3
4
5
• Do not throw toner cartridges into a fire. Toner may
fly and cause burns.
• Store toner cartridges out of the reach of small
children.
• Always store toner cartridges on their sides. If toner
cartridges are stored on end, the toner may harden
and become unusable.
and become unusable.
• Please use SHARP-recommended toner cartridges.
If toner cartridges other than SHARP-recommended
toner cartridges are used, the machine may not
attain full quality and performance and there is a risk
of damage to the machine.
toner cartridges are used, the machine may not
attain full quality and performance and there is a risk
of damage to the machine.
• The fusing unit and the output unit are hot.
• Take care not to touch the fusing unit when
• Take care not to touch the fusing unit when
removing a misfeed.
• There is a risk of burning.
Replacing a toner cartridge
Removing misfeeds
Caution
Caution
Gently pull straight
out with both
hands
out with both
hands