Sharp R3.1 ユーザーズマニュアル

 

 

 

•  If your network operates under Simple Addressing or Exception DHCP policies 

described in Chapter 2, it is recommended to select ‘Use IP Address’ to identify your 
computer. 

•  If your network operates under Regular DHCP or Full DHCP policies described in 

Chapter 2, it is recommended to select ‘Use Host Name’ to identify your computer. 

•  After making your selection, click OK. 

 

The following table summarizes the recommended choices depending on the policy in force 
on your network. 

1) Simple addressing 

Use IP address 

Use IP address 

2) Regular DHCP 

Use IP address 

Use Host Name 

3) Full DHCP 

Use Host Name 

Use Host Name 

4) Exception DHCP 

Use Host Name 

Use IP address 

Note: Periodically, after the setup wizard runs, the addressing methods selected will not 
match this table. This is generally not a problem, but if you have trouble using the ‘Scan to 
Desktop’ profiles, set up the addresses manually to correct the problem. 
 
•  After entering the IP Address or Host Name on the Properties for Scanner screen, click 

OK. The process settings take effect immediately. 
 

Select the scanner for which you want to view or update settings from the Known Scanners list 
and click the Properties button. The Properties for Scanner screen displays the settings for the 
specified scanner and can be updated as described above. 

Network Scanner Tool User’s Guide