Opticon NFT 1125 ユーザーズマニュアル

Manual No. 25-NFT1121-01

Series NFT-1121/2135 Mini CCD Fixed Position Scanners

Section 5

Application Engineering Support

Technical Assistance and Support

Opticon is eager to help you integrate the NFT-1125/2135 Series scanner into your application. Our technical

support staff is available to answer any questions or work with you to adapt the scanner to your specific

situation. We are happy to answer your questions, assist in configuring and positioning the scanner for

optimum operation, and help resolve any problems you encounter. Call us at 1 (800) 636-0090.

Common Causes of Poor Performance

The most common reasons for poor scanning performance are listed below.

♦

Bar codes are not positioned at the focal distance of the scanner.

♦

Specular reflection is impacting the scanner. Change the angle/position of the scanner or the bar code.

♦

Poor quality of printed bar codes. Bar codes are out of specification.

♦

The paper on which the bar code is printed is highly reflective or has a glossy finish causing light to be

reflected into the scanner.

♦

The distance from the scanner to the bar code is not suitable for the density of the bar code. Or the

density of the bar code beyond the scanners capability.

♦

If the red illuminating light of the scanner is not on, the scanner may be in the “Trigger Enable” mode

expecting a trigger signal.

Modified and/or Customized Scanners

Opticon will work with you to modify or customize scanners to match your requirements. Scanners can be

modified in terms of connectors type, pin-outs, cable length, default settings, custom software and many

other areas.

Opticon will modify scanners in our factory and ship you scanners that match your specific requirements. By

incorporating your modifications directly into production scanners, you receive scanners tailored for your

need. They can be used immediately without the need for further modification or rework.

Page 15