Radio Shack PRO-2052 ユーザーズマニュアル

22

ority channel (for up to a total of 10
stored channels). As the scanner
scans the bank, if the priority feature is
turned on, the scanner checks the pri-
ority channel for activity every 2 sec-
onds.

The scanner automatically desig-
nates each bank's first channel as its
priority channel. Follow these steps to
select a different channel as the priori-
ty channel for a bank.

1. Press 

.

2. Enter the channel number you

want to select as the priority chan-
nel, then press 

 again.

3. Hold down 

 until the

scanner beeps twice. 

 appears

to the right of the channel number.

4. Repeat Steps 2 and 3 for the

channel in each bank you want to
program as a priority channel.

To turn on the priority feature, press

 during scanning. 

 ap-

pears. As you scan the bank, the
scanner checks the bank’s priority

channel every 2 seconds in each bank
that is turned on, starting from the low-
est to the highest-numbered priority
channel.

To turn off the priority feature, press

.

 disappears.

Note:  The priority feature must be
turned off to use the data skip feature
(see “Skipping Data Signals” on
Page 25).

You can lock out priority channels. If
you lock out all priority channels, 

 

 

 appears when you turn

on the priority feature.

20-432.fm  Page 22  Friday, July 14, 2000  11:30 AM