Canon M111021 ユーザーズマニュアル
13
Maintenance
This chapter describes how to clean and maintain the scanner.
Daily Cleaning
To ensure high-quality image scanning, regularly clean your CR-190i
as described below.
as described below.
CAUTION
• Before you clean the scanner, turn OFF the scanner and
computer, and disconnect the power cord from the power
outlet. Otherwise, it may cause an electrical shock.
outlet. Otherwise, it may cause an electrical shock.
• Never clean the scanner with any kind of organic solvent, such
as alcohol, benzene, or paint thinner. This may cause a fire and
electrical shock, or cause the exterior of the scanner to
disfigure or discolor.
electrical shock, or cause the exterior of the scanner to
disfigure or discolor.
• Never spray mild detergent or water directly on the scanning
glass. The spray could penetrate below the glass and
contaminate the internal light source and lenses.
contaminate the internal light source and lenses.
Cleaning the Main Unit
Wipe the scanner with a firmly wrung cloth, moistened slightly with
water or mild detergent. Then, wipe off with a clean, dry cloth.
water or mild detergent. Then, wipe off with a clean, dry cloth.
Cleaning the Feed Path
If dirt appears on scanned documents, clean the feed path. Clean the
feed path regularly.
feed path regularly.
1
Pull the Open Button, and pull the Front Maintenance
Cover open to the right and left.
Cover open to the right and left.
IMPORTANT
If you notice paper dust in the feed path when you open the
Maintenance Cover, clean it out with a cotton swab.
Maintenance Cover, clean it out with a cotton swab.
2
Press the Open Button, and push the Back Maintenance
Cover open to the back.
Cover open to the back.