Wasp Bar Code WLS 8400 FZ ユーザーズマニュアル
WLS 8400 Product Reference Guide
8-38
Interleaved 2 of 5 (I 2 of 5)
Enable/Disable Interleaved 2 of 5
To enable or disable Interleaved 2 of 5, scan the appropriate bar code below, and select an
Interleaved 2 of 5 length from the following pages.
Interleaved 2 of 5 length from the following pages.
*
Enable Interleaved 2 of 5
Disable Interleaved 2 of 5
Set Lengths for Interleaved 2 of 5
The length of a code refers to the number of characters (i.e., human readable characters),
including check digit(s) the code contains. Lengths for I 2 of 5 may be set for any length,
one or two discrete lengths, or lengths within a specific range.
including check digit(s) the code contains. Lengths for I 2 of 5 may be set for any length,
one or two discrete lengths, or lengths within a specific range.
One Discrete Length - This option allows the scanner to decode only those I 2 of 5
symbols containing a selected length. Lengths are selected from the numeric bar codes
beginning on page
symbols containing a selected length. Lengths are selected from the numeric bar codes
beginning on page
. For example, to decode only I 2
of 5 symbols with 14 characters, scan I 2 of 5 - One Discrete Length, then scan 1 followed
by 4. In case of an error, or to change the selection, scan Cancel on page
by 4. In case of an error, or to change the selection, scan Cancel on page
.
I 2 of 5 - One Discrete Length