Intel SR1680MV ユーザーズマニュアル

Intel

Server System SR1680MV Service Guide

You can install single or dual processors on the motherboard according to your own needs.

1. If a SINGLE processor is intended, it is recommended that you install the processor

on the processor 1 socket. Refer to Figure 10.

2. If installing DUAL processors, use the same type of processor running at the same

frequency.

Note: Before you remove or install the heatsink, processor or heatsink socket, complete the

following steps:

1. Make sure the server is not turned on or connected to the AC power. To power off

the server, see

2. Remove the chassis cover. To remove the cover, see

Removing the Processor

1. Unlock the load lever and lift it up.
2. Open the load plate.

Figure 11. Opening the Load Plate

3. Lift the processor out of the socket.