Intel SR1680MV ユーザーズマニュアル
Intel
®
Server System SR1680MV Service Guide
25
Left and Right I/O Board Cage Modules
The left and right I/O board cage modules share the same steps during the removal and
installation procedures. For your reference, this section takes the steps of removing and
installing the left I/O board cage module as an example.
The location of the left and right I/O board cage modules on the server chassis is shown in
the following figures:
Figure 25. Left I/O Board Cage Module Location
Figure 26. Right I/O Board Cage Module Location
Note: Before you remove or install the server board, complete these steps:
1. Make sure the server is not turned on or connected to the AC power. To power off
the server, see
.
2. Disconnect all necessary cable connections.
3. When removing and installing I/O board cage module, keep the handle of the
3. When removing and installing I/O board cage module, keep the handle of the
power supply in the horizontal direction to avoid damage on it.