Metrologic Instruments MS7320 ユーザーズマニュアル

 

 

18 

V

ISUAL 

I

NDICATORS

 

 

There is a red LED and green LED on  

the front of the MS7320.  When the scanner is on, the 

flashing or constant illumination of the LEDs indicates 

the status of the current scan and the scanner. 

 

The LEDs will not be illuminated if the scanner is not receiving 

power from the host or transformer. 

 
Steady Green 

 

When the laser is active, the green LED is illuminated.  The 

green LED will remain illuminated until the laser is deactivated.  

 

During the power save mode, the laser will turn on and off. 

During this period, the green LED remains illuminated. 

 
Steady Green and Single Red Flash 

 

When the scanner successfully reads a bar code, the red LED 

will flash and the scanner will beep once.  If the red LED does 

not flash or the scanner does not beep once, then the bar code 

has not been successfully read. 

 
Steady Green and Steady Red 

 

After a successful scan, the scanner transmits the data to the 

host device.  Some communication modes require that the host 

inform the scanner when data is ready to be received.  If the 

host is not ready to accept the information, the scanner’s red 

LED will remain on until the data can be transmitted. 

 
Flashing Green then Flashing Red 

 

This indicates the scanner is in program mode.  A razzberry 

tone indicates that an invalid bar code has been scanned in 

this mode. 
or   

If the unit is in sleep mode, each LED will flash once every 15 

seconds.  
 
Steady Red, Green off 

This indicates the scanner may be waiting for communication 

from the host.