Intel C50277-001 ユーザーズマニュアル

Intel® Entry Server Chassis SC5275-E User Guide 

 

If no drives are present on an IDE channel, the cable must be removed.  If only one drive is 
installed, it should be connected at the end of the cable. 

✏

 

To disable the IDE controller:  If you plan to disable the IDE controller to 
reuse the interrupt for that controller, you must physically unplug the IDE 
cable from the board connector if a cable is present.  Simply disabling the 
drive by configuring the SSU option does not make the interrupt available. 

Two 5.25-inch half-height bays provide space for tape backup, CD-ROM, or other removable 
media drives. 

✏

 

Save the EMI shields:  EMI integrity and cooling are both protected by 
having drives installed in the bays or EMI shields covering the bays.  When 
you install a drive, save the shield to reinstall in case you should later remove 
the drive and not reinstall one in the same bay.   

 

1.  Remove the EMI shield by using the finger-slots to grasp it and pull it straight out.  Save the 

shield in case you later remove the peripheral. 

2.  Remove the plastic filler panel from the bezel. 

TP00061