Sony 8000SF ユーザーズマニュアル

187

Setup

  Chapt

Various settings are required, in order to operate the switcher, control panel, 
DME, external devices, and so on, connected together in a single system.
This is referred to as “setup,” and you can carry out the setup operations from 
the Engineering Setup menu.

The settings in the Engineering Setup menu are grouped under the following 
headings.
• System setup (System): Settings relating to the whole system (see the 

• Panel setup (Panel): Settings particular to the control panel (see page 195)
• Switcher setup (Switcher): Settings particular to the switcher processor 

• DME setup (DME): Settings particular to the DME processor (see page 

• DCU setup (DCU): DCU input and output settings (see page 202)
• Router/tally setup (Router/Tally): Router interface and tally settings (see 

The system setup settings apply to the whole system. Here the “whole system” 
refers to all devices connected on the Control LAN.
The DCU is connected through the control panel, but is also included in the 
“whole system.”
You can make the following settings.

This provides automatic configuration of all devices connected to the Data 
LAN (excluding the DCU), and displays a list of them.

Specify the overall system operation mode and the hierarchical relationship of 
the devices.