HP (Hewlett-Packard) FC 1GB/2GB SWITCH 16B ユーザーズマニュアル

Installing and Configuring the HP Surestore FC 1Gb/2Gb Switch 16B

Note

Allow for 1U space in the rack for every five switches to facilitate cable 

management.

a. Connect the power cable to the FC 16B power supply and to a power outlet. 

b. Turn on the power supply (flip the AC switch to “I”) when ready to supply power to 

the switch. The switch automatically runs POST (power on self-test) each time it is 
turned on.

c. If the FC 16B includes a second power supply, repeat Steps 9a and 9b for the 

remaining power supply.

Note

Do not connect the switch to the network until the IP address is correctly set. 

For instructions on how to set the IP address, see 

The following items are required to configure and connect the FC 16B for use in a network 
and fabric:

•

The FC 16B installed and connected to a power source

•

Workstation that has a terminal emulator application (such as HyperTerminal)

•

Serial cable provided with the switch, for connecting the switch to the workstation

•

An unused IP address

•

Ethernet cable for connecting the switch to the workstation or to a network containing 
the workstation

•

SFPs and FC cables, as required to connect the switch to the fabric

1. Replace the factory IP address and related information with the IP information provided 

by your network administrator by completing the following steps:

a. Remove the shipping plug from the serial port and insert the serial cable provided 

with the FC 16B.

b. Connect the other end of the serial cable to an RS-232 serial port on the workstation. 

If no RS-232 serial port is available on the workstation, the adapter on the end of the 
serial cable can be removed to use the RJ-45 connector to create a serial connection.

c. Verify that the switch power is on and POST is completed.

d. Disable any serial communication programs running on the workstation.

e. Open a terminal emulator application (such as HyperTerminal on a PC, or TERM in 

a UNIX environment), and configure as follows: