HP (Hewlett-Packard) FC 1GB/2GB SWITCH 16B ユーザーズマニュアル

Installing and Configuring the HP Surestore FC 1Gb/2Gb Switch 16B

FTP must be used on Windows workstations to backup the system configuration. The FTP 
server must be running before an upload can occur. Use the RSHD service on a UNIX 
machine.

Note

The two supplied utilities, RSHD.EXE and CAT.EXE currently do not support 

uploads for Windows, only downloads. FTP must be used on Windows machines.

1. Verify that the RSHD service (on a UNIX machine) or the FTP service (on a Windows 

machine) is running on the host workstation.

2. Login to the switch as the admin user.

3. At the command line enter the following command:

configUpload "hostIPaddr", "user", "path_filename","password"

where 

hostIPaddr

 is the IP address of the host computer, 

user

 is the User ID used to 

log into this computer, 

path_filename

 is the path location and filename of the 

configuration file, and 

password

 is the password for the user ID specified. If only 

configUpload

 is entered the system prompts you for each parameter.

Example:

switch:admin> configupload

Server Name or IP Address [host]: 123.45.678.901

User Name [user]: kelev

File Name [config.txt]: switch1

Protocol (RSHD or FTP) [rshd]: ftp

Password:

upload complete

To restore the system configuration settings from a backup:

1. Verify that the RSHD service (on a UNIX machine) or the FTP service (on a Windows 

machine) is running on the host workstation.

2. Login to the switch as the admin user.

3. Shut down the switch by entering the following command:

switchDisable

4. At the command line enter the following command:

configDownload "hostIPaddr", "user", "path_filename","password"

where 

hostIPaddr

 is the IP address of the host computer, 

user

 is the User ID used to 

log into this computer, 

path_filename

 is the path location and filename of the 

system configuration file, and 

password

 is the password for the user ID specified.