Avaya P460 ユーザーズマニュアル
Chapter 5
Avaya P460 Layer 3 Features
Avaya P460 Configuration Guide
47
RIP2
RIP2 overcomes some of the shortcomings of RIP. Table 5.2 summarizes the
differences between RIP and RIP2.
differences between RIP and RIP2.
RIP CLI Commands
Table 5.2
Differences Between RIP and RIP2
RIP2
RIP
Multicast addressing
Broadcast Addressing
Event-driven
Timer-based – update every 30
seconds
seconds
VLSM support – subnet information
transmitted
transmitted
Fixed subnetwork masks
Security (authentication)
No security
Provision for EGP/BGP (Route tag)
No provision for external protocols
In order to...
Use the following command...
Configure the Routing Information
Protocol (RIP)
Protocol (RIP)
Specify a list of networks on which
the RIP is running
the RIP is running
Redistribute routing information
from other protocols into RIP
from other protocols into RIP
Specify the RIP version running on
the interface basis
the interface basis
Set the interface RIP route metric
value
value
Set the RIP Send and Receive mode
on an interface
on an interface
Enable learning of the default route
received by the RIP
received by the RIP
Enable split-horizon with poison-
reverse on an interface
reverse on an interface