Omnitron Systems Technology 8481-4 プリント

Trademarks are owned by their respective companies. 

iConverter 

is a registered trademark of Omnitron Systems Technology, Inc.

NetOutlook 

is a trademark of Omnitron Systems Technology, Inc.  Specifications subject to change without notice.

©2003-2007 Omnitron Systems Technology, Inc.  All rights reserved.

091-18481-001B

9/07

Management is accomplished by using a Network Management
Module (NMM) or a media converter with integrated management
(such as an 

10/100M2) that provides monitoring,

remote configuration and trap notification.  The management
module can be accessed via SNMP, Telnet and via a serial port.
The SNMP-based management is accomplished via Omnitron’s
intuitive, graphic-oriented 

management software or

third party SNMP management software. Management via
the Telnet and the serial interfaces have an easy-to-use,
menu-driven interface.

Some of the real-time 4Tx VT parameters that can be monitored
include link and data receive status. Other parameters include
module type and model, hardware and software revisions, serial
numbers and a user-defined identifier.

The user can override the 4Tx VT module’s physical switch
settings by using SNMP or Telnet to remotely configure switch-
selectable parameters such as auto-negotiation, Half or
Full-Duplex, and Backplane Selection.

In addition to all standard 

 SNMP traps such as module

insertion and removal, the 4Tx VT modules can generate traps
on port state changes including link-up and link-down.  Trap
monitoring of specific events can be selectively enabled or
disabled by the network administrator.

The 

 family of managed fiber access media converters

are used in Service Provider access networks and Enterprise
LANs. 

 media converters provide fiber connectivity

with copper to fiber, multimode fiber to single-mode fiber, or
dual fiber to single-fiber conversions.

RJ-45 x 4

100m

For wide temperature (-40 to 60º C) modules, add a "W" to the end of

the model number. Consult factory for other configurations and extended
temperature (-40 to +75º C) modules.

10BASE-T, 100BASE-TX

RJ-45

 BP Enable, Auto/Man, 

10/100, FDX/HDX

Power, 10/100 UTP Link

W:0.85" x D:4.5" x H:2.8"

8 oz.

UL, CE, FCC Class A

0.7A @ 3.3VDC (typical)

               Standard:    0 to 50º C
                    Wide:    -40 to 60º C
                 Storage:   -40 to 80º C

5 to 95% (non-condensing)

-100m to 4000m

740,000