HP (Hewlett-Packard) BMD00022 ユーザーズマニュアル
Configuration Menu 112
Table 79
System Configuration Menu options
Command Usage
dlight enable|disable
Enables or disables daylight savings time in the system clock. When
enabled, the switch adds an extra hour to the system clock so that it is
enabled, the switch adds an extra hour to the system clock so that it is
consistent with the local clock. The default setting is disabled.
idle <1-60>
Sets the idle timeout for CLI sessions, from 1 to 60 minutes. The default
value is 5 minutes.
This setting affects both the console port and Telnet port.
value is 5 minutes.
This setting affects both the console port and Telnet port.
notice <1-1024 character
multi-line> <'-' to end>
multi-line> <'-' to end>
Displays login notice immediately before the Enter password: prompt.
This notice can contain up to 1024 characters and new lines.
bannr <1-80 characters>
Configures a login banner of up to 80 characters. When a user or
administrator logs into the switch, the login banner is displayed. It is also
administrator logs into the switch, the login banner is displayed. It is also
displayed as part of the output from the /info/sys/gen command.
hprompt disable|enable
Enables or disables displaying of the host name (system administrator’s
name) in the command line interface.
name) in the command line interface.
bootp disable|enable
Enables or disables the use of BOOTP. If you enable BOOTP, the switch
will query its BOOTP server for all of the switch IP parameters. The default
will query its BOOTP server for all of the switch IP parameters. The default
value is enabled.
dhcp disable|enable
Enables or disables Dynamic Host Control Protocol for setting the
management IP address on interface 250. When enabled, the IP
address obtained from the DHCP server overrides the static IP
address. The default value is enabled.
address. The default value is enabled.
reminders disable|enable
Enables or disables reminder messages in the CLI. The default value is
enabled
enabled
.
cur
Displays the current system parameters.
System host log configuration
Command: /cfg/sys/syslog
[Syslog Menu]
host - Set IP address of first syslog host
host2 - Set IP address of second syslog host
sever - Set the severity of first syslog host
sever2 - Set the severity of second syslog host
facil - Set facility of first syslog host
facil2 - Set facility of second syslog host
console - Enable/disable console output of syslog messages
log - Enable/disable syslogging of features
cur - Display current syslog settings