HP (Hewlett-Packard) BMD00022 ユーザーズマニュアル

 

 

 

Configuration Menu  127  

 

 

SNMPv3 Notify Table configuration  

Command:  /cfg/sys/ssnmp/snmpv3/notify 

[SNMPv3 snmpNotifyTable 1  Menu] 

     name     - Set notify name 

     tag      - Set notify tag 

     del      - Delete notifyTable entry 

     cur      - Display current notifyTable configuration 

SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system for 

particular events or conditions, and generates Notification-Class messages based on these events or 

conditions. 
The following table describes the SNMPv3 Notify Table Configuration menu options. 

Table 94 

 SNMPv3 Notify Table Configuration Menu options

Command Description 

name <1-32 characters> 

Defines a locally arbitrary but unique identifier associated with this SNMP 
notify entry. 

tag <1-255 characters> 

Defines a tag of 255 characters maximum that contains a tag value which is 
used to select entries in the Target Address Table. Any entry in the 
snmpTargetAddrTable

, that matches the value of this tag, is selected. 

del

 

Deletes the notify table entry. 

cur

 

Displays the current notify table configuration. 

 

System Access configuration  

Command:  /cfg/sys/access 

[System Access Menu] 

     mgmt     - Management Network Definition Menu 

     user     - User Access Control Menu (passwords) 

     http     - Enable/disable HTTP (Web) access 

     https    - HTTPS Web Access Menu 

     wport    - Set HTTP (Web) server port number 

     snmp     - Set SNMP access control 

     tsbbi    - Enable/disable telnet/ssh configuration from BBI 

     tnet     - Enable/disable Telnet access 

     tnport   - Set Telnet server port number 

     tport    - Set the TFTP Port for the system 

     cur      - Display current system access configuration 

The following table describes the System Access Configuration menu options. 

Table 95 

 System Access Configuration Menu options

Command Description 

mgmt

 

Displays the Management Configuration Menu. 

user

 

Displays the User Access Control Menu. 

http disable|enable

 

Enables or disables HTTP (Web) access to the Browser-based Interface. It is 
enabled by default. 

https

 

Displays the HTTPS Menu.