Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. HP (Hewlett-Packard)
  4. BMD00022
  5. ユーザーズマニュアル

HP (Hewlett-Packard) BMD00022 ユーザーズマニュアル

ダウンロード
ページ / 228
 
 
 
Configuration Menu  131  
 
 
Port configuration 
Command:   /cfg/port <port number> 
[Port 1 Menu] 
     gig      - Gig Phy Menu 
     aclqos   - Acl/Qos Configuration Menu 
     stp      - STP Menu - for PVRST only 
     8021ppri - Set default 802.1p priority 
     pvid     - Set default port VLAN id 
     name     - Set port name 
     rmon     - Enable/Disable RMON for port 
     tag      - Enable/disable VLAN tagging for port 
     tagpvid  - Enable/disable tagging on pvid 
     brate    - Set BroadCast Threshold 
     mrate    - Set MultiCast Threshold 
     drate    - Set Dest. Lookup Fail Threshold 
     ena      - Enable port 
     dis      - Disable port 
     cur      - Display current port configuration 
This menu enables you to configure settings for individual switch ports. This command is enabled by 
default. 
 
 
NOTE:
 Port 17 is reserved for switch management.  
The following table describes the Port Configuration Menu options.  
Table 100 
 Port Configuration Menu options
 
Command Description 
gig
 
Displays the Gigabit Ethernet Physical Link Menu. 
aclqos
 
Displays the Access Control List (ACL)/Quality of Service (QoS) configuration 
menu. 
stp  
Displays the port PVRST menu.  
8021ppri
 
Configures the port’s 802.1p priority level. 
pvid <1-4094>
 
Sets the default VLAN number which will be used to forward frames which are 
not VLAN tagged. The default number is 1. 
VLAN 4095 is reserved for switch management.  
name <1-64 
characters>|none
 
Sets a name for the port (maximum 64 characters). The assigned port name 
displays next to the port number on some information and statistics screens. 
rmon enable|disable
 
Enables or disables Remote Monitoring for the port. RMON must be enabled 
for any RMON configurations to function. 
tag enable|disable
 
Disables or enables VLAN tagging for this port. It is disabled by default.  
tagpvid 
enable|disable
 
Disables or enables VLAN tag persistence. When disabled, the VLAN tag is 
removed from packets whose VLAN tag matches the port PVID. The default 
value is enabled.  
brate <0-262143>|dis
 
Limits the number of broadcast packets per second to the specified value. If 
disabled (dis), the port forwards all broadcast packets.