HP (Hewlett-Packard) BMD00022 ユーザーズマニュアル

 

 

 

Configuration Menu  134  

 

 

Port PVRST configuration  

Command:  /cfg/port <port number>/stp 

[Port 1 STP Menu] 

     edge     - Enable/disable edge port (for PVRST only) 

     link     - Set port link type (auto, p2p, or shared; default: auto)  

               (for PVRST only) 

     cur      - Display current port stp configuration 

The following table describes the port PVRST Configuration Menu options.  

Table 103  

Port PVRST Configuration Menu options

 

Command Description 

edge enable|disable 

Enables or disables this port as an edge port. An edge port is not 
connected to a bridge, and can begin forwarding traffic as soon as the 

link is up. Configure server ports as edge ports (enabled). The default 
value is enabled.  

link auto|p2p|shared 

Defines the type of link connected to the port, as follows: 

• 

auto—

Configures the port to detect the link type, and automatically 

match its settings. 

• 

p2p—

Configures the port for Point-To-Point protocol. 

• 

shared—

Configures the port to connect to a shared medium (usually 

a hub). 

The default link type is auto.  

cur

 

Displays current port PVRST parameters.