HP (Hewlett-Packard) BMD00022 ユーザーズマニュアル

 

 

 

Configuration Menu  172  

 

 

OSPF Virtual Link configuration  

Command:  /cfg/l3/ospf/virt <1-3> 

[OSPF Virtual Link 1  Menu] 

     aindex   - Set area index 

     hello    - Set hello interval in seconds 

     dead     - Set dead interval in seconds 

     trans    - Set transit delay in seconds 

     retra    - Set retransmit interval in seconds 

     nbr      - Set router ID of virtual neighbor 

     key      - Set authentication key 

     mdkey    - Set MD5 key ID 

     enable   - Enable interface 

     disable  - Disable interface 

     delete   - Delete interface 

     cur      - Display current OSPF interface configuration 

The following table describes the OSPF Virtual Link Configuration Menu options.  

Table 146 

 OSPF Virtual Link Configuration Menu options

Command Description 

aindex <0-2> 

Configures the OSPF area index. 

hello <1-65535> 

Configures the authentication parameters of a hello packet, which is set to be in 
an interval of seconds. 

dead <1-65535> 

Configures the health parameters of a hello packet, which is set to be in an 

interval of seconds. Default is 40 seconds. 

trans <1-3600> 

Configures the delay in transit in seconds. Default is one second. 

retra <1-3600> 

Configures the retransmit interval in seconds. Default is five seconds. 

nbr <IP address> 

Configures the router ID of the virtual neighbor. Default is 0.0.0.0. 

key <password> 

Configures the password (up to eight characters) for each virtual link. Default is 
none

. 

mdkey <1-255>|none 

Sets MD5 key ID for each virtual link. Default is none. 

enable

 

Enables OSPF virtual link. 

disable

 

Disables OSPF virtual link. 

delete

 

Deletes OSPF virtual link. 

cur

 

Displays the current OSPF virtual link settings.