HP (Hewlett-Packard) BMD00022 ユーザーズマニュアル

 

 

 

Maintenance Menu  216  

 

 

Maintenance Menu 

Introduction 

The Maintenance Menu is used for debugging purposes, enabling you to generate a technical 

support dump of the critical state information in the switch, and to clear entries in the Forwarding 

Database and the Address Resolution Protocol (ARP) and routing tables. This menu is available only 
from an administrator and operator login.  

Menu information 

Command:  /maint  

[Maintenance Menu] 

     sys     - System Maintenance Menu 

     fdb     - Forwarding Database Manipulation Menu 

     debug   - Debugging Menu 

     arp     - ARP Cache Manipulation Menu 

     route   - IP Route Manipulation Menu 

     igmp    - IGMP Multicast Group Menu 

     uudmp   - Uuencode FLASH dump 

     ptdmp   - Upload FLASH dump via FTP/TFTP 

     ptfile  - Upload FLASH dump via FTP/TFTP 

     cldmp   - Clear FLASH dump 

     panic   - Dump state information to FLASH and reboot 

     tsdmp   - Tech support dump 

     pttsdmp  - Upload tech support dump via FTP/TFTP 

Dump information contains internal switch state data that is written to flash memory on the switch after 

any one of the following occurs: 

• 

The switch administrator forces a switch panic. The panic option, found in the Maintenance 

Menu, causes the switch to dump state information to flash memory, and then causes the switch 

to reboot.  

• 

The switch administrator enters the switch reset key combination (Ctrl-Shift-6) on a device that is 

attached to the console port.  

• 

The switch detects a hardware or software problem that requires a reboot. 

The following table describes the Maintenance Menu options. 

Table 196 

 Maintenance Menu options

Command Usage 

sys

 

Displays the System Maintenance Menu. 

fdb

 

Displays the Forwarding Database Manipulation Menu. 

debug

 

Displays the Debug Menu. 

arp

 

Displays the ARP Cache Manipulation Menu. 

route 

Displays the IP Route Manipulation Menu.