Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. HP (Hewlett-Packard)
  4. BMD00022
  5. ユーザーズマニュアル

HP (Hewlett-Packard) BMD00022 ユーザーズマニュアル

ダウンロード
ページ / 228
 
 
 
Information Menu  50  
 
 
Layer 3 information 
Command:  /info/l3 
[Layer 3 Menu] 
     route    - IP Routing Information Menu 
     arp      - ARP Information Menu 
     ospf     - OSPF Routing Information Menu 
     rip      - RIP Routing Information Menu 
     ip       - Show IP information 
     igmp     - Show IGMP Snooping Multicast Group information 
     vrrp     - Show Virtual Router Redundancy Protocol information 
     sm       - Server Mobility Information Menu 
     dump     - Dump all layer 3 information 
The following table describes the Layer 3 Information Menu options.  
Table 26 
 Layer 3 Information Menu options
 
Command Usage 
route
 
Displays the IP Routing Menu. Using the options of this menu, the system displays the 
following for each configured or learned route: 
• 
Route destination IP address, subnet mask, and gateway address 
• 
Type of route 
• 
Tag indicating origin of route 
• 
Metric for RIP tagged routes, specifying the number of hops to the destination (1-15 
hops, or 16 for infinite hops) 
• 
The IP interface that the route uses 
arp
 
Displays the Address Resolution Protocol (ARP) Information Menu. 
ospf
 
Displays OSPF routing Information Menu. 
rip
 
Displays Routing Information Protocol Menu. 
ip
 
Displays IP Information. IP information, includes: 
• 
IP interface information: Interface number, IP address, subnet mask, VLAN number, 
and operational status. 
• 
Default gateway information: Metric for selecting which configured gateway to use, 
gateway number, IP address, and health status 
• 
IP forwarding information: Enable status, lnet and lmask 
• 
Port status 
igmp
 
Displays IGMP Information Menu. 
vrrp
 
Displays the VRRP Information Menu. 
sm  
Displays the Server Mobility Information Menu.  
dump
 
Dumps all switch information available from the Layer 3 Menu (10K or more, depending 
on your configuration). 
If you want to capture dump data to a file, set your communication software on your 
workstation to capture session data prior to issuing the dump commands.