DELL N3000 ユーザーズマニュアル

ページ / 1460
Configuring DHCPv6 Server and Relay Settings
1283
console(config-dhcp6s-pool)#prefix-delegation 
2001:DB8:1002::/32 
00:01:00:09:f8:79:4e:00:04:76:73:43:76 valid-
lifetime 600 preferred-lifetime 400
console(config-dhcp6s-pool)#exit
Configure the DHCPv6 server functionality on VLAN 200 and specify the 
pool to use for DHCPv6 clients.
console(config)#interface vlan 200
console(config-if-vlan200)#ipv6 dhcp server my-
pool2 preference 20
Configuring an Interface as a DHCPv6 Relay Agent
This example configures a VLAN routing interface as a DHCPv6 Relay. The 
command defines the destination address of the relay server and the interface 
used for reachability to the relay server.
To configure the switch:
Create VLAN 300 and define its IPv6 address.
console(config)#interface vlan 300
console(config-if-vlan300)#ipv6 address 
2001:DB8:03a::/64
Configure the interface as a DHCPv6 relay agent and specify the IPv6 
address of the relay server. The command also specifies that the route to 
the server is through the VLAN 100 routing interface.
console(config-if-vlan300)#ipv6 dhcp relay 
destination FE80::250:A2FF:FEBF:A056 interface 
vlan 100
console(config-if-vlan300)#exit
console(config)#exit
View the DHCPv6 configuration for VLAN 300.
console#show ipv6 dhcp interface vlan 300
IPv6 Interface.......................... ...Vl300
Mode....................................... Relay
Relay Address........... FE80::250:A2FF:FEBF:A056