Cabletron Systems FDDI ユーザーズマニュアル

 

Introduction

 

The 7F06-02 Module is designed to be installed in the 7C03 MMAC 
SmartSwitch, the 7C04 Workgroup SmartSwitch or the 7C04-R 
Workgroup SmartSwitch.

The modular design of the 7C03 MMAC SmartSwitch allows other 
modules that support Ethernet, Fast Ethernet, ATM, FDDI, or Token Ring 
to be used with the 7F06-02 Module. These modules provide the 
capability to share data without the use of external bridges or routers.

The 7C03 MMAC SmartSwitch is a unique module that can be installed 
in an MMAC Series chassis. The 7C04 Workgroup SmartSwitch and the 
7C04-R Workgroup SmartSwitch are stand-alone chassis that provide the 
same functions. 

 

The 7F06-02 Module provides two FDDI ports via front panel FPIMs. 
The 7F06-02 Module includes the following features:

 

The front panel connections are standard Cabletron FPIMs. These 
FPIMs allow the use of single mode or multimode fiber cable with 
MIC or SC type connectors.

 

The 7F06-02 uses LANVIEW, Cabletron Systems built-in visual 
diagnostic and status monitoring system. With LANVIEW LEDs, you can 
quickly identify, at a glance, the status of the device connected to a port 
on the 7F06-02 Module.