Intel ETX CD ユーザーズマニュアル

3 Specifications

Kontron User's Guide ETX CD

System Memory
The ETX®-CD uses 200-pin DDR2 Small Outline-Dual Inline Memory Modules (SO-DIMMs). One socket is
available for a DDR2-533 or DDR2-667 module up to 2GB capacity.

Note: ETX®-CD equipped with the CeleronM423 is not able to drive memory modules faster than DDR2-533.

Serial Digital Video Output (SDVO): Intel 945GM

Concurrent Operation of PCI Express Graphics with SDVO

Supports appropriate external SDVO components (DVI, LVDS, TV-out)

PCI 32: Intel ICH7

Parallel PCI Bus 32 bit 33 MHz

Enhanced Intelligent Drive Electronics (EIDE): Intel ICH7

One PCI Bus Master IDE port

Supports 2 IDE devices

Ultra 33 Direct Memory Access (DMA) mode

Programmed Input/Output (PIO) modes up to Mode 4 timing

Multiword DMA Mode 0,1,2 with independent timing

Serial ATA: Intel ICH7

2 Channels Serial ATA

SATA Spec. Rev. 1.0 up to 150 MB/s per channel

Universal Serial Bus: Intel ICH7

4 USB

USB legacy keyboard support

USB floppy, CD-ROM, Hard drive, and memory stick boot support

10/100MB Ethernet:: Intel ICH7

Fully compatible with IEEE 802.3

Onboard video graphics array (VGA): Intel® 945GM:

Intel® Gen 3.5 Graphics engine

Dynamic Video Memory Technology (DVMT 3.0)

Cathode ray tube (CRT) up do QXGA

low voltage differential signaling (LVDS) liquid-crystal display (LCD) and SDVO
interfaces up to UXGA

Supports DX 9.1