Mitsubishi Electronics XL21 ユーザーズマニュアル
REV 2.4
21
1.2.7. Screen open/close (for
F
F
r
r
o
o
n
n
t
t
)
Cabling or lamp replacement, etc. requires opening the screen unit. Be careful not to trap your
fingers during the work.
The open/close should be
performed on a one-by-one basis in
a display wall so as not to shift the
center of gravity much.
In particular,
fingers during the work.
The open/close should be
performed on a one-by-one basis in
a display wall so as not to shift the
center of gravity much.
In particular,
6
6
7
7
”
”
may cause topple
down due to wide shifting of the
center of gravity. When you
open/close the screen units on
stand-alone cubes without fixing to
a base stand or other cubes, be
sure to use the support base which
is contained in the cube carton box.
center of gravity. When you
open/close the screen units on
stand-alone cubes without fixing to
a base stand or other cubes, be
sure to use the support base which
is contained in the cube carton box.
1.2.7.1. Screen
opening
Caution
About one-meter space in front of the screens
is needed for the opening. Prior to work, make
sure that there is no object such as steps in the
working space.
is needed for the opening. Prior to work, make
sure that there is no object such as steps in the
working space.
1.
5
5
0
0
”
”
: Make sure that the two screen-fixing bolts (M6 –
45mm, gold hexagon socket) have been removed.
2. Pull the screen-drawing handles in both sides to draw the
screen till locked.
Screen-fixing bolts
Screen-drawing handle
Support base
Screen unit
Cube unit