Patton electronic 4658 Series ユーザーズマニュアル

 

SmartNode 4654 & 4658  ADSL2+ Quick Start Guide

 

To access the SmartNode, start the Telnet application on your PC. Type the default IP address into the 
address field: 

 

. Accessing your SmartNode via a Telnet session displays the login screen. 

Type the factory default login: 

 

 and leave the password empty. Press the 

 

 key after the 

password prompt.

 

 login:

 

 password:<Enter>
 192.168.1.1>
 

 

After you log in, your SmartNode will be running in operator execution mode (indicated by > character 
in the command line prompt). To enter configuration mode, use the commands 

 

 and 

 

. 

 

 192.168.1.1>

 

 192.168.1.1#

 

 192.168.1.1(cfg)#

 

To modify IP configuration settings, you must enter 

 

 mode. Enter the following command:

 

 192.168.1.1(cfg)#

 

 192.168.1.1(ctx-ip)[router]#
 

 

Now you can set your IP address and network mask for the interface 

 

. In this example a 

network 172.16.1.0/24 is assumed. The IP address in example is set to 

 

. (You should set it 

to the IP address that the network provider has given you.)

 

The examples in this guide use a private IP network with the network address 

 

.

 

 192.168.1.1(ctx-ip)[router]#

 

 192.168.1.1(if-ip)[eth_dsl]#

 

 2002-10-29T00:09:40 : LOGINFO    : Link down on interface eth0.
 2002-10-29T00:09:40 : LOGINFO    : Link up on interface eth0.
 172.16.1.99(if-ip)[eth_dsl]#
 

 

Copy this modified configuration to your new start-up configuration. This will store your changes in non-
volatile memory. On the next start-up the system will initialize itself using the modified configuration. 

 

 172.16.1.99 (if-ip)[eth_dsl]#

 

 172.16.1.99 (if-ip)[eth_dsl]#

 

The SmartNode can now be connected to your network.

 

The interconnecting cables shall be acceptable for external use and shall be rated for 
the proper application with respect to voltage, current, anticipated temperature, flam-
mability, and mechanical serviceability.

CAUTION