Marantz VP8600 ユーザーズマニュアル

• Press the 

button on the remote controller for the 4:3 aspect ratio video source.

• Press the 

button on the remote controller for 16:9 aspect ratio video source, such as

1080i, 1035i, and 720p video systems.

• Press the 

, 

or 

button on the remote controller for the squeezed

video source.

❖

❖

The 16:9 squeezed image is displayed with
the correct aspect.

❖

❖

16 : 9  video source

The 4:3 image is enlarged horizontally.

The picture in normal ratio 4:3 is displayed.

4 : 3  video source

❖

Press the 

button on the remote controller. 

The projector turns off.

The fan continues running for about 1 minute to internally cool the projector. In the
meantime, the Power LED on the projector flashes a blue color and buttons on the remote
control are irresponsive to touch. Once the fan stops, the Power LED blinks (blue) slowly
to indicate the projector is on standby.

Turn off the main power switch.

- Do not pull out the AC power cord until the projector turns in standby mode.
- Do not pull out the power cord suddenly in the state of “POWER ON." It can cause a

breakdown.

- When a error message blinks, turn off the main power switch after checking that the fan

has stopped.

- The projector will not be turned on if the 

button on the remote controller is pressed

immediately after turning off. Press the 

button on the remote controller after the

projector turns into standby mode.

VP8600_eng  05.10.25  9:33 AM  ページ13