Panasonic PT-DS8500U ユーザーズマニュアル
DISPLAY OPTION menu
72
- ENGLISH
Settings
J
Adjusting the position
automatically
automatically
Select [POSITION ADJUST] in step 3).
1.
Press ◄► to switch [POSITION
2.
ADJUST].
The setting will change as follows each time
z
◄► is pressed.
OFF
ON
OFF
Automatic adjustment is off.
ON
Screen position and size are
adjusted during AUTO SETUP
operation.
adjusted during AUTO SETUP
operation.
J
Adjusting the signal level
automatically
automatically
Select [SIGNAL LEVEL ADJUST] in
1.
step 3).
Press ◄► to switch [SIGNAL LEVEL
Press ◄► to switch [SIGNAL LEVEL
2.
ADJUST].
The setting will change as follows each time
z
◄► is pressed.
OFF
ON
OFF
Automatic adjustment is off.
ON
The black level (On-screen menu
[BRIGHTNESS]) and white level
(On-screen menu [CONTRAST])
are adjusted during AUTO SETUP
operation.
[BRIGHTNESS]) and white level
(On-screen menu [CONTRAST])
are adjusted during AUTO SETUP
operation.
Note
If the input image is not a still image with a clear
z
difference between black and white, the [SIGNAL LEVEL
ADJUST] function may not operate normally.
ADJUST] function may not operate normally.
RGB IN
(Only RGB input)
Change this setting to change the input impedance of
the synchronous signal input.
the synchronous signal input.
Press ▲▼ to select [RGB IN].
1 )
Press <ENTER> button.
2 )
The [
z
RGB IN] screen will be displayed.
Press ▲▼ to select [RGB1 SYNC
3 )
TERMINAL] or [RGB2 SYNC
TERMINAL].
Press ◄► to switch.
TERMINAL].
Press ◄► to switch.
4 )
The setting will change as follows each time
z
◄► is pressed.
LOW
HIGH
LOW
Input impedance is set to [LOW].
HIGH
Input impedance is set to [HIGH].
DVI-D IN
Change this setting if video does not display normally
when the projector and an external device are
connected via DVI.
when the projector and an external device are
connected via DVI.
Press ▲▼ to select [DVI-D IN].
1 )
Press <ENTER> button.
2 )
The [
z
DVI-D IN] screen will be displayed.
Press ▲▼ to select [DVI EDID].
3 )
Press ◄► to switch [DVI EDID].
4 )
The setting will change as follows each time
z
◄► is pressed.
EDID3
EDID1
EDID2 : PC
EDID3
Switch between fine settings for a
moving image and for a still image.
moving image and for a still image.
EDID1
Mainly select this when an external
device (DVD player, etc.) for
outputting video signals of a moving
image system is connected to DVI-D
IN.
device (DVD player, etc.) for
outputting video signals of a moving
image system is connected to DVI-D
IN.
EDID2 : PC
Mainly use this when an external
device (PC, etc.) for outputting video
signals of a still image system is
connected to DVI-D IN.
device (PC, etc.) for outputting video
signals of a still image system is
connected to DVI-D IN.
Press ▲▼ to select [DVI SIGNAL
5 )
LEVEL].