Panasonic PT-DS8500U ユーザーズマニュアル
PROJECTOR SETUP menu
ENGLISH -
85
Settings
Press <ENTER> button.
4 )
The [ADJUST CLOCK] screen will be displayed.
z
Press ▲▼ to select the item to be set,
5 )
and press ◄► to set the local time.
Press ▲▼ to select [APPLY], and
Press ▲▼ to select [APPLY], and
6 )
press <ENTER> button.
This completes setting of the time.
z
J
Adjusting the date and time
automatically
automatically
Press ▲▼ to select [DATE AND TIME].
1 )
Press <ENTER> button.
2 )
Press ▲▼ to select [ADJUST CLOCK].
3 )
Press <ENTER> button.
4 )
The [ADJUST CLOCK] screen will be displayed.
z
Press ▲▼ to select [NTP
5 )
SYNCHRONIZATION] and press ◄► to
switch to [ON].
switch to [ON].
The setting will change as follows each time
z
◄► is pressed.
OFF
ON
Press ▲▼ to select [APPLY], and
6 )
press <ENTER> button.
This completes setting of the time.
z
Note
To set the date and time automatically, the projector must
z
be connected to the network.
If synchronization with the NTP server fails just after
If synchronization with the NTP server fails just after
z
[NTP SYNCHRONIZATION] is turned [ON], or if [NTP
SYNCHRONIZATION] is turned [ON] while the NTP
server is not set, [NTP SYNCHRONIZATION] will return
to [OFF].
Access the projector via a web browser to set the NTP
SYNCHRONIZATION] is turned [ON] while the NTP
server is not set, [NTP SYNCHRONIZATION] will return
to [OFF].
Access the projector via a web browser to set the NTP
z
server. (
LENS CALIBRATION
This automatically sets the limit value of the lens shift
and the home position of the projector.
and the home position of the projector.
Press ▲▼ to select [LENS
1 )
CALIBRATION].
Press <ENTER> button.
2 )
A confirmation message will be displayed.
z
Press ◄► to select [OK], and press
3 )
<ENTER> button.
To stop, select [CANCEL].
z
The lens will move vertically and horizontally,
z
and the limit value of the lens shift and home
position are set automatically.
The lens will stop, completing the calibration.
position are set automatically.
The lens will stop, completing the calibration.
z
Note
While lens calibration is being executed, a message
z
[PROGRESS] appears on the menu. The calibration
cannot be canceled halfway.
If the lens calibration has been correctly executed, a
cannot be canceled halfway.
If the lens calibration has been correctly executed, a
z
message [COMPLETE] will appear. If the calibration has
not been correctly executed, a message [INCOMPLETE]
will appear.
not been correctly executed, a message [INCOMPLETE]
will appear.
FILTER COUNTER RESET
After you replaced the Auto Cleaning Filter (ACF),
[REMAINING FILTER] of [STATUS] need to be reset
to [0].
[REMAINING FILTER] of [STATUS] need to be reset
to [0].
Press ▲▼ to select [FILTER COUNTER
1 )
RESET].
Press <ENTER> button.
2 )
The [RESET FILTER COUNTER?] screen will
z
be displayed.
Press ◄► to select [OK], and press
3 )
<ENTER> button.
Note
For replacing ACF unit, refer to
z
If the filter has not been installed, [OK] cannot be
z
selected.
The filter is wound during the resetting operation. Some
The filter is wound during the resetting operation. Some
z
sound may be produced during the winding operation.