AEG 3.M 2 ユーザーズマニュアル

Almost all labor and 

production processes today 

are based on high capacity 

data and IT infrastructure. 

Power outages or voltage 

fluctuations that lead to 

systems failure end almost 

always with disrupted 

operations, loss of production 

and, at worst, irretrievable data 

loss.

Your important IT infrastructure 

must be permanently available 

and protected against power 

disturbances of all kinds. 

Through the use of VFI 

(conversion) technology, 

Protect 3.M 2.0 reliably protects 

your systems against power 

outages and network 

disruptions and ensures the 

value of your business.

Protect 3.M 2.0 is an 

uninterruptible power supply 

of the highest reliability.

With increasing demands on 

performance, the compact 

modular design adapts 

the permitted UPS power 

according to your current 

power needs. This can be done 

without additional installation 

costs since the power modules 

can be easily inserted and are 

automatically recognized by 

the system (“hot swappable”). 

No additional connections are 

required for this operation.
Dynamic redundancy
An automatic load balancing 

to all modules within an 

appropriately designed system 

delivers N+x redundancy 

without the requirement for 

any configuration changes or 

increases to load capacity.

Protect 3.M 2.0 is based 

on high efficiency IGBT 

technology. This provides 

an efficiency of up to 95 % 

in double conversion mode. 

With a 35 % loading, the UPS 

still maintains an efficiency 

of 94 %. In addition to the 

lowering of power loss 

unwanted generation of 

heat is also reduced, thereby 

reducing air conditioning 

requirements. All of this leads 

to significant cost savings and 

a reduction in CO

2

 emissions.

Input power factor 1.0
100 % active power from the 

UPS reduces the generator 

specification and consequent 

installation cost increases.

Protect 3.M 2.0