Paradyne 8820 ユーザーズマニュアル
18
Therefore this object will be set to the value of 127.
4. Evolution of the Interfaces Group of MIB-II (RFC 2863)
The interfaces group consists of an object indicating the number of interfaces supported by
the unit and an interface table containing an entry for each interface in the GranDSLAM
R3.2. Since RFC 2863 is an SNMPv2 MIB it will be converted to SNMPv1 for support by
the GranDSLAM R3.2. There will be entries for WAN interfaces, ATM cell interfaces, an
AAL5 interface, management interfaces and DSL interfaces.
the unit and an interface table containing an entry for each interface in the GranDSLAM
R3.2. Since RFC 2863 is an SNMPv2 MIB it will be converted to SNMPv1 for support by
the GranDSLAM R3.2. There will be entries for WAN interfaces, ATM cell interfaces, an
AAL5 interface, management interfaces and DSL interfaces.
4.1
“ifNumber” Object (interfaces 1)
ifNumber will be supported as specified in the Evolution MIB and will specify the number
of rows in the ifTable for this particular device.
of rows in the ifTable for this particular device.
4.1.1
“ifIndex” Object (ifEntry 1)
This object provides the index into the ifTable and typically into tables in other MIBs also.
A unique value, greater than zero, for each interface or interface sublayer in the managed
system. It is recommended that values be assigned contiguously starting from 1. The value
for each interface sublayer must remain constant at least from one re-initialization of the
entity’s network management system to the next re-initialization.
A unique value, greater than zero, for each interface or interface sublayer in the managed
system. It is recommended that values be assigned contiguously starting from 1. The value
for each interface sublayer must remain constant at least from one re-initialization of the
entity’s network management system to the next re-initialization.
4.1.1.1
ifIndex scheme
This section introduces the ifIndex scheme to be used in the GranDSLAM R3.2 product. It
describes the interfaces to be managed as specified in the system requirements along with
their corresponding ifIndex assigned. The assignment of the values to the ifIndex in the
product is static and maintained across power cycles and software upgrades. The first
column in
describes the interfaces to be managed as specified in the system requirements along with
their corresponding ifIndex assigned. The assignment of the values to the ifIndex in the
product is static and maintained across power cycles and software upgrades. The first
column in
, is the Interface description. The
second column corresponds to the layer in the stack where this interface fits (It does not
necessary match the layer in the OSI model). The third column is the number of this
interface supported in the current software release. The forth column is the maximum
number of this interface that is envisioned in this product. The fifth column is the name
associated with that instance of the interface.
necessary match the layer in the OSI model). The third column is the number of this
interface supported in the current software release. The forth column is the maximum
number of this interface that is envisioned in this product. The fifth column is the name
associated with that instance of the interface.
The ‘x’ suffix in some ifName values corresponds to the interface/port number within the
same chassis.
same chassis.