Paradyne 8820 ユーザーズマニュアル

This Paradyne MIB is an extension to the standard DS1 MIB (RFC 2495). This MIB 
provides additional DS1 and G.703 (E1) configuration objects not provided by RFC 2495.

The various objects supported are shown in the following table. 

This entry specifies the type of loop length for the interface. The posibble values are 
shortHaul(1), longHaul(2). short-haul is intended for intra-building use. long-haul is 
intended for inter-building use. The default value is long-haul.

This entry specifies the loop length, in feet, for a short-haul DS1 line. This object only 
applies to DS1 interfaces. Note: This object shares a mutually exclusive relationship with 
the pdnDs1ExtConfLineBuildOut object. Only one of the two can be used for configuration 
at a time, based on the pdnDs1ExtConfLineLengthType object. The default value is 
feet000To133.

dsx1ConfigEntry

Supported as is

dsx1CurrentEntry

Supported as is

dsx1IntervalEntry

Supported as is

dsx1TotalEntry

Supported as is

dsx1ChanMappingEntry

Supported as is

dsx1FarEndCurrentEntry

Supported as is

dsx1FarEndIntervalEntry

Supported as is

dsx1FarEndTotalEntry

Supported as is

pdnDs1ExtConfTable

Supported objects:

pdnDs1ExtConfLineLengthType
pdnDs1ExtConfLineLength
pdnDs1ExtConfLineBuildOut
pdnDs1ExtConfConnector