HP (Hewlett-Packard) E2A03UT#ABA ユーザーズマニュアル
Hard drive and optical drive cables and connectors
Description
Spare part number
Optical drive cable (data and power assembly)
733492-001
Hard drive cable (data and power assembly)
733491-001
The hard drive and optical drive connectors are located near the middle of the computer, partially
under the main frame. Each connector is secured with two Torx screws and has two cables that connect
to the system board.
To remove the hard drive or optical drive connector:
1.
Prepare the computer for disassembly (see
).
2.
).
3.
4.
Remove the lower rear panel (see
5.
6.
Remove the VESA mounting plate (see
).
7.
Remove the power supply (see
).
8.
Remove the system board (see
9.
Remove the front bezel and display panel (see
).
10.
Remove two Torx screws that secure the hard drive connector or the optical drive connector to the
computer.
11.
Remove the cables from the metal clips built into the computer.
12.
Disconnect the hard drive cables or the optical drive cables from the system board.
NOTE:
Be careful not to damage the cable when disconnecting it from the board. Do not pull on
the wires.
Hard drive and optical drive cables and connectors
103