HP (Hewlett-Packard) E2A03UT#ABA ユーザーズマニュアル
mSATA Solid-State Drive
The mSATA SSD is located near the bottom of the system board. The drive is secured with two Phillips
screws.
NOTE:
In the following image, the mSATA SSD is not shown.
To remove the mSATA SSD:
1.
Prepare the computer for disassembly (see
).
2.
3.
Remove the two Phillips screws (1) that secure the SSD to the computer.
4.
Lift the SSD to a 45-degree angle, and then pull it away to remove it from the socket (2).
To install the mSATA SSD, reverse the removal procedures.
NOTE:
mSATA SSD are designed with a notch to prevent incorrect insertion.
mSATA Solid-State Drive
51