HP (Hewlett-Packard) DX2000 ユーザーズマニュアル

Use Computer Setup Utilities (F10) to: 

■

Modify or restore factory default settings.

■

Set the system date and time.

■

Set, view, change, or verify the system configuration including settings for processor, 
graphics, memory, audio, storage, communications, and input devices.

■

Modify the boot order of bootable devices such as hard drives, diskette drives, optical drives, 
or LS-120 drives.

■

Configure the boot priority of IDE (ATA) and SCSI hard drive controllers.

■

The system is preset to always Quick Boot.

■

Enable or disable Network Server Mode, which allows the computer to boot the operating 
system when the power-on password is enabled with or without a keyboard or mouse 
attached. When attached to the system, the keyboard and mouse remain locked until the 
power-on password is entered.

■

Enable power-on password prompting during system restarts (warm boots) as well as during 
power-on.

■

Establish a setup password that controls access to Computer Setup (F10) Utility and the 
settings described in this section.

■

Secure the integrated I/O functionality, including the serial, USB, or parallel ports, audio, or 
embedded NIC, so that they cannot be used until they are unsecured.

■

Enable or disable removable media boot ability.

■

Enable or disable removable media write ability (when supported by hardware).

■

Solve system configuration errors detected but not automatically fixed during the Power-On 
Self-Test (POST).

■

Execute self-tests on a specified IDE (ATA) hard drive (when supported by the drive).

Computer Setup can be accessed only by turning on the computer or restarting the system. To 
access the Computer Setup Utilities menu, complete the following steps: 

1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart.

2. As soon as the computer is turned on, press and hold the 

 key until you enter Computer 

Setup. Press 

 to bypass the title screen, if necessary.

✎

If you do not press the 

 key at the appropriate time, you must turn the computer off, then on 

again, and press the 

 key again to access the utility.

 

 

If you are using a PS/2 keyboard, you may see a Keyboard Error message—disregard it.

3. Select your language from the list and press the 

 key.

4. A choice of four headings appears in the Computer Setup Utilities menu: File, Storage, 

Security, and Advanced.