Toshiba PRO L300D ユーザーズマニュアル
User’s Manual
7-5
HW Setup and Passwords
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in sleep mode, you can
turn on the computer by pressing any key. It is effective only for the internal
keyboard and only when the computer is in sleep mode.
turn on the computer by pressing any key. It is effective only for the internal
keyboard and only when the computer is in sleep mode.
USB
Legacy USB Support
Use this option to enable or disable USB Legacy Emulation. If your
operating system does not support USB, you can still use a USB mouse
and keyboard by setting the USB Legacy Emulation item to enabled.
operating system does not support USB, you can still use a USB mouse
and keyboard by setting the USB Legacy Emulation item to enabled.
LAN
Wake-up on LAN
This feature lets the computer’s power be turned on when it receives a
wake-up signal from the LAN.
wake-up signal from the LAN.
■
If a supervisor password is set, the menu above does not appear when
you use the user password to start the computer.
you use the user password to start the computer.
■
The selection method above does not change the boot priority settings
in HW Setup.
in HW Setup.
■
If you press a key other than one of those above or if the selected
device is not installed, the system will boot according to the current
setting in HW Setup.
device is not installed, the system will boot according to the current
setting in HW Setup.
Enabled
Enables the Wake-up on Keyboard.
Disabled
Disables the Wake-up on Keyboard. (Default)
Enabled
Enables the USB Legacy Emulation. (Default)
Disabled
Disables the USB Legacy Emulation.
Enabled
Enables the Wake-up on LAN.(Default)
Disabled
Disables the Wake-up on LAN.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
LAN is enabled.
Wake-up on LAN does not work without the AC adaptor. Leave it
connected, if you are using this feature.
connected, if you are using this feature.