Oceanic GEO ユーザーズマニュアル

106

FREE DIVE MODE

When FREE (Free Dive Mode) is selected as the Operating Mode, the GEO will

operate as a Digital Depth Gauge with select features.  Nitrogen calculations are

based upon a default FO2 of AIR and the amount remaining during 24 hours is

carried over between FREE and NORM Operating Modes.

  To access FREE Operating Mode while Watch MAIN TIME is displayed, press

the M button 3 times (2 seconds each time), or while the GAUG SURF MAIN

screen is displayed (and no GAUG dive was made), press the M button 1

time for 2 seconds.  The graphic FREE will flash indicating that FREE can be

selected as the Operating Dive Mode.

  To select FREE for diving, press/release the M button while the FREE graphic

is flashing.  When the graphic becomes solid, FREE Mode is selected for the

type of dives to be conducted.

WATCH TIME > NORM SURF > GAUG SURF > FREE SURF

FREE SURF MAIN DISPLAY, information includes (Fig. 97) -

>  TLBG representing nitrogen loading, if any.

>  Graphic FREE alternating with the Altitude Level graphic

    SEA (or EL 2 through EL13) and graphic WET (if wet), each

    3 seconds On then 1/4 second Off.

>  Surface Interval Time (min:sec up to 59:59, then hr:min)

    with SURF and TIME icons.

>  Battery icon if a Low Battery Warning Condition exists,

    flashing if Too Low.

>  Total number of repetitive FREE Dives conducted in that

    series with DIVE icon.

Fig. 97 - FREE SURF

MAIN