Oceanic GEO ユーザーズマニュアル

CHRONOGRAPH (Stop Watch/Lap Timer)

Pressing and releasing the M button momentarily 3 times

(< 2 seconds each) while the MAIN TIME screen is

displayed will access the CHRONOGRAPH displaying the

elapsed time if previously started or 0:00:00.00

(hr:min:sec.1/100th sec), flashing (Fig. 19).

Pressing and releasing the S button momentarily (< 2

seconds) will start the TIMER which will begin counting up

from 0:00:00.00 to 9:59:59.99 (hr:min:sec.1/100th sec)

in increments of .01 (1/100th sec).

> During the first 4 seconds the 1/100th second values will

be displayed, then 2 dashes ( . - - ) will be displayed. The

1/100th values will be recorded and displayed when

LAPs are frozen and when later recalled.

Subsequent pressing and releasing of the S button (< 2

seconds each) will freeze Lap Times (LAP1 through LAP9).

After 9 Laps are recorded, additional LAPs will replace

LAP9, shift the others to lower LAP numbers, while

discarding LAP1.

> If the time reaches 9:59:59.99 hr:min:sec.1/100 sec, it

will stop and save that number as a LAP. Subsequent

presses of the S button will then have no effect.

Pressing and releasing the A button momentarily (< 2

seconds) will Stop the Timer and Recall LAP1, displaying

the graphic LAP1 (flashing) and the LAP 1 Time. Repeat

presses will display other LAPs/Times (Fig. 20).

Depressing and holding the A button for 2 seconds will

stop the Timer and reset the Time to 0:00:00.00 (flashing).

Fig. 19 - CHRONO-

GRAPH

Fig. 20 - LAP RECALL