Oceanic GEO ユーザーズマニュアル

Depressing and holding the S button while the Set Point is flashing will scroll

through the Set Points from AIR to 21 through 50% in 1% increments, at a

rate of 8 per second.

The scroll will stop when the button is released, or momentarily at 32% (even

if the button is held depressed).

Depressing and holding the S button again will resume the scroll from 32

through 50%, then stop at AIR (or 21%).

Pressing and releasing the A button momentarily (< 2 seconds) will save the

setting and/or advance to SET FO2 DEFAULT with the Set Point flashing.

Depressing the A and S buttons simultaneously for 2 seconds will save the

setting and revert back to the SET F screen.

Depressing and holding the M button for 2 seconds, or if no button is pressed

for a period of 2 minutes, operation will revert to the NORM or GAUG SURF

MAIN screen.

SET FO2 50% DEFAULT, information includes (Fig. 39):

> Graphics DFLT and 50 with FO2 icon.

> Set Point graphic OFF (or ON) flashing, with FO2 icon.

> Nx icon.

Pressing and releasing the S button (< 2 seconds) will toggle

between OFF and ON.

Pressing and releasing the A button momentarily (< 2

seconds) will save the setting and revert to the SET F screen.

Depressing and holding the M button for 2 seconds or if no

button is pressed for a period of 2 minutes operation will revert

to the NORM or GAUG SURF MAIN screen.

Fig. 39 - SET FO2 50%

DEFAULT