Zebra Technologies 105SL Plus ユーザーズマニュアル

Select a Location for the Printer

7/3/13

P1056468-002 

Select a location for the printer that meets these conditions:

• Surface: The surface where the printer will be located must be solid, level, and of 

sufficient size and strength to hold the printer.

• Space: The area where the printer will be located must include enough space for 

ventilation and for accessing the printer components and connectors. To allow for proper 
ventilation and cooling, leave open space on all sides of the printer.

• Power: The printer should be within a short distance of an appropriate power outlet that is 

easily accessible.

• Data communication interfaces: The printer must be within range of your WLAN radio 

(if applicable) or within an acceptable range for other connectors to reach your data source 
(usually a computer). For more information on maximum cable lengths and configuration, 
see 

• Operating conditions: Your printer is designed to function in a wide range of 

environmental and electrical conditions, including a warehouse or factory floor. 

 

shows the temperature and relative humidity requirements for the printer when it is 
operating.

Do not place any padding or cushioning material behind or under the printer 

because this restricts air flow and could cause the printer to overheat.

Thermal Transfer

41° to 104°F (5° to 40°C)

20 to 85% non-condensing

Direct Thermal

32° to 104°F (0° to 40°C)