Zebra Technologies 105SL Plus ユーザーズマニュアル

Printer Setup and Operation
Select a Data Communication Interface

P1056468-002  

7/3/13

You must supply all data cables for your application.

Ethernet cables do not require shielding, but all other data cables must be fully shielded and 
fitted with metal or metallized connector shells. Unshielded data cables may increase radiated 
emissions above the regulated limits.

To minimize electrical noise pickup in the cable:

• Keep data cables as short as possible.

• Do not bundle the data cables tightly with the power cords.

• Do not tie the data cables to power wire conduits.

Wireless print server

Option

Can print to the printer from any computer on your Wireless 
Local Area Network (WLAN).

Can communicate with the printer through the printer’s web 
pages.

The printer must be configured to use your WLAN.

A parallel connection or a wired print server (if installed) takes 
up this port on the printer.

Configuration  Refer to the ZebraNet Wired and Wireless Print 
Servers User Guide for configuration instructions. A copy of this 
manual is available at 

 or on the 

user CD that came with your printer.