Zebra Technologies 105SL Plus ユーザーズマニュアル
Printer Configuration and Adjustment
Changing Printer Settings
Changing Printer Settings
98
P1056468-002
7/3/13
Subnet Mask
View or Set the Subnet Mask
View and, if necessary, change the subnet mask.
View and, if necessary, change the subnet mask.
This menu item appears only if a wired or wireless print server is installed on your
printer. To save changes to this setting, set
printer. To save changes to this setting, set
IP PROTOCOL
to
PERMANENT
, and then
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used:
Wired: internal_wired.ip.netmask
external_wired.ip.netmask
Wireless: wlan.ip.netmask
Control panel menu item:
Printer web page:
View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings > Subnet Mask
TCP/IP Settings > Subnet Mask
Default Gateway
View or Set the Default Gateway
View and, if necessary, change the default gateway.
View and, if necessary, change the default gateway.
This menu item appears only if a wired or wireless print server is installed on your
printer. To save changes to this setting, set
printer. To save changes to this setting, set
IP PROTOCOL
to
PERMANENT
, and then
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used:
Wired: internal_wired.ip.gateway
external_wired.ip.gateway
Wireless: wlan.ip.gateway
Control panel menu item:
Printer web page:
View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings > Default Gateway
TCP/IP Settings > Default Gateway
MAC Address
View the MAC Address
View the Media Access Control (MAC) address of the print server that is installed in the
printer (wired or wireless).
printer (wired or wireless).
Accepted values:
N/A
Related ZPL command(s):
none
SGD command used:
Wired: internal_wired.mac_addr
external_wired.mac_addr
Wireless: wlan.mac_addr
Control panel menu item:
Printer web page:
none
Table 9 • Network Settings (Continued)