Brady 6441 ユーザーズマニュアル
35
4.1.3
Print Control
+
Refer to Section 2.1.1 for detailed information on print quality controls.
HEAT
²
²
10 (0-30)
Controls the ‘burn-time’ of the printhead.
This is the equivalent of Heat Setting on most
label software programs.
This is the equivalent of Heat Setting on most
label software programs.
PRINT SPEED
Controls the rate of label movement during
the printing process; see Appendix C.
the printing process; see Appendix C.
FEED SPEED
Controls the rate of label movement between
printing areas; see Appendix C.
printing areas; see Appendix C.
REVERSE SPEED
Controls the rate of label movement during
backup positioning for start of print, cutting
or present distance; see Appendix C.
backup positioning for start of print, cutting
or present distance; see Appendix C.
ROW OFFSET
²
²
00.00in (0-99.99)
Shifts the vertical start of print position. This
is the user setting for row adjustment.
is the user setting for row adjustment.
COLUMN OFFSET
²
²
00.00 in (0-99.99)
Shifts the horizontal, left-justified start of
print position to the right without shifting the
Label Width termination point to the right.
This is the user setting for Column Adjust.
print position to the right without shifting the
Label Width termination point to the right.
This is the user setting for Column Adjust.
PRESENT DISTANCE
²
²
0.00 in (0-4.00)
Sets the label stop position past the start of
print. When the next label format is received,
the printer will automatically backfeed to the
start position. If a quantity of more than one
label is printed without a present sensor
enabled, or if the present distance is set to
zero, the printer will operate without
reversing.
print. When the next label format is received,
the printer will automatically backfeed to the
start position. If a quantity of more than one
label is printed without a present sensor
enabled, or if the present distance is set to
zero, the printer will operate without
reversing.