Fujitsu FTP-623MCL400 ユーザーズマニュアル

■

This battery driven, micro line thermal printer provides high speed
printing for 2-inch wide (58mm) paper. It is suitable for portable
equipment that requires compact,  light weight components.

In addition to the interface board, a driving LSI (MCU + Gate Array)
is also available.

■

and batteries)
It can be driven by a broad range of voltages (4.2 to 8.5 V) of
NiCd or Nickel-Hydrogen by using Fujitsu Components' unique
head drive control system. The battery pack can be connected
directly to the print head without a voltage regulator. Also, a
lithium-ion battery can be used.

It can print at approximately 23 character lines/s (460 dotlines/s =
57.5 mm/s).

It has a light weight of approximately 75 g.

The peak current for head driving is approximately 3.0 A.

Front, rear, and top paper insertion paths can be used.

Paper feeding is enabled by operating the head up lever.

This model is suitable for printing on a variety of papers,
including 1-ply roll paper, 2-ply paper (TCC and roll), labels, and
long-life paper.

1