Zebra Technologies ZM400 ユーザーズマニュアル
ZM400/ZM600
Specifications Subject to Change without Notice
Technical
Specifications
Product Guide - EMEA
27
May 2007
Printing Specifications
•
203 dpi resolution (8 dots/mm)
- Dot size (W x L):
0.0049" x 0.0049" (0.125mm x 0.125mm)
- Dot size (W x L):
0.0049" x 0.0049" (0.125mm x 0.125mm)
•
300 dpi resolution (12 dots/mm)
- Dot size (W x L):
0.0033" x 0.0039" (0.084mm x 0.099mm)
- Dot size (W x L):
0.0033" x 0.0039" (0.084mm x 0.099mm)
•
600 dpi resolution (24 dots/mm)
- Dot size (WxL):
0.0016” x 0.0016” (0.042mm x 0.042mm)
- Dot size (WxL):
0.0016” x 0.0016” (0.042mm x 0.042mm)
•
First dot location measured from inside media backing edge:
0.10" ±.04" (2.5mm ± 1 mm)
0.10" ±.04" (2.5mm ± 1 mm)
•
Maximum print width: 4.09" (104mm)
•
Maximum continuous media print length:
203 dpi
300 dpi
600 dpi
157"
3988mm
73”
1854mm
39"
991mm
•
Media registration tolerance:
- Vertical = < ±0.039" (±1.0mm) on non-continuous media - ---
Horizontal = < ±0.039" (±1.0mm) within a roll of media
- Vertical = < ±0.039" (±1.0mm) on non-continuous media - ---
Horizontal = < ±0.039" (±1.0mm) within a roll of media
•
Programmable print speeds:
- 203 dpi = 2.4" (61mm), 3” (76mm) through 10" (254mm) per
second in 1" increments
- 300 dpi = 2.4" (61mm), 3” (76mm) through 8" (203mm) per
second in 1" increments
- 600 dpi = 1.5” (38mm), 2” (51mm), 3” (76mm), 4” (102mm)
per second
- 203 dpi = 2.4" (61mm), 3” (76mm) through 10" (254mm) per
second in 1" increments
- 300 dpi = 2.4" (61mm), 3” (76mm) through 8" (203mm) per
second in 1" increments
- 600 dpi = 1.5” (38mm), 2” (51mm), 3” (76mm), 4” (102mm)
per second
Media Specifications
•
Maximum non-continuous label length: 39" (991mm)
•
Media type: continuous, die-cut, tags, black-mark
•
Media web width (label and liner):
1.0" (25.4mm) to 4.50" (114mm) Tear / Cutter
1.0” (25.4mm) to 4.25” (108mm) Peel / Rewind
1.0" (25.4mm) to 4.50" (114mm) Tear / Cutter
1.0” (25.4mm) to 4.25” (108mm) Peel / Rewind
•
Minimum label length:
- 0.5" (12.7mm) in Tear, Peel and Rewind Mode
- 1.0" (25.4mm) in Cutter Mode
- 0.5" (12.7mm) in Tear, Peel and Rewind Mode
- 1.0" (25.4mm) in Cutter Mode
•
Media thickness (label and liner):
0.0023" (0.058mm) to 0.010" (0.25mm)
0.0023" (0.058mm) to 0.010" (0.25mm)
•
Maximum media roll size:
8.0" (203mm) O.D. on a 3" (76mm) I.D. core
8.0" (203mm) O.D. on a 3" (76mm) I.D. core
•
Maximum fan-fold pack size:
8.0"L (203mm) x 4.5"W (114mm) x 6.2"H (157mm)
8.0"L (203mm) x 4.5"W (114mm) x 6.2"H (157mm)
•
Gap and notch sensing standards:
- Inter-label gap: 2 - 4mm, preferably 3mm
- Sensing notch: 0.25"W (6mm) x 0.12"L (3mm)
- Sensing hole: 0.125" (3mm) diameter
* Note: Notch & Hole Position centered from 0.25” to 2.25”
from media inner edge
- Inter-label gap: 2 - 4mm, preferably 3mm
- Sensing notch: 0.25"W (6mm) x 0.12"L (3mm)
- Sensing hole: 0.125" (3mm) diameter
* Note: Notch & Hole Position centered from 0.25” to 2.25”
from media inner edge
•
Black mark sensing standards:
- Black mark length (parallel to inside media edge):
0.098" - 0.453" (2.5mm - 11.5mm)
- Black mark width (perpendicular to inside media edge):
> 0.37" (> 9.5mm)
- Black mark location: within 0.040"(1mm) of inside media edge
- Black mark density: > 1.0 Optical Density Units (ODU)
- Maximum media density: 0.5 ODU
- Black mark length (parallel to inside media edge):
0.098" - 0.453" (2.5mm - 11.5mm)
- Black mark width (perpendicular to inside media edge):
> 0.37" (> 9.5mm)
- Black mark location: within 0.040"(1mm) of inside media edge
- Black mark density: > 1.0 Optical Density Units (ODU)
- Maximum media density: 0.5 ODU
Ribbon Specifications
•
Ribbon width: 2.00" (51mm) to 4.33" (110mm)
•
Standard Lengths: 984' (300m) or 1476' (450m)
•
Maximum ribbon roll size:
3.2" (81.3mm) O.D. on a 1.0" (25.4mm) I.D. core
•
Ribbon wound ink-side out (Ribbon wound ink-side in can be
used with optional ribbon spindle).
used with optional ribbon spindle).
Standard Printer Fonts
Fonts A, B, C, D, E, F, G, H, and GS are expandable up to 10 times,
height and width independently. However, fonts E and H (OCR-A
and OCR-B) are not considered “in-spec" when expanded.
The scalable smooth font 0 (CG Triumvirate™ Bold Condensed) is
expandable on a dot-by-dot basis, height and width independent,
while maintaining smooth edges. Maximum character size depends
on available memory.
IBM Code Page 850 international character sets are available in the
fonts A, B, C, D, E, F, G, and 0 through software control.
height and width independently. However, fonts E and H (OCR-A
and OCR-B) are not considered “in-spec" when expanded.
The scalable smooth font 0 (CG Triumvirate™ Bold Condensed) is
expandable on a dot-by-dot basis, height and width independent,
while maintaining smooth edges. Maximum character size depends
on available memory.
IBM Code Page 850 international character sets are available in the
fonts A, B, C, D, E, F, G, and 0 through software control.
Font
Matrix
Type*
Character Size
Inches
Millimeters
Height
Width
Int
er-ch
ar
act
er Gap
Height
Width
Cha
r/inc
h
Height
Width
Cha
r/mm
A 9
5 1
U-L-D 0.044
0.029 34.0 1.13 0.75 1.33
B 11
7 2
U 0.054
0.044 22.7 1.38 1.13 0.89
C,D 18
10 2
U-L-D 0.088
0.059 17.0 2.25 1.50 0.67
E 28
15 5 OCR-B 0.137
0.098 10.2 3.50 2.50 0.40
F 26
13 3
U-L-D 0.127
0.078 12.8 3.25 2.00 0.50
G 60
40 8 U-L-D
0.294
0.235 4.3 7.50 6.00
0.17
H 21
13 6 OCR-A
0.103
0.093 10.7 2.63 2.38 0.42
GS 24
24 2 S
YMBOL
0.118 0.127 7.8
3.00 3.25 0.31
P 20
18 N/A U-L-D .098 .088 N/A 2.50 2.25 N/A
Q 28
24 N/A U-L-D .137 .118 N/A 3.50 3.00 N/A
R 35
31 N/A U-L-D .172 .152 N/A 4.38 3.88 N/A
S 40
35 N/A U-L-D .196 .172 N/A 5.00 4.38 N/A
T 48
42 N/A U-L-D .235 .206 N/A 6.00 5.25 N/A
U 59
53 N/A U-L-D .289 .260 N/A 7.38 6.63 N/A
V 80
71 N/A U-L-D .392 .348 N/A
10.00
8.88 N/A
0
Default: 15 x 12
U-L-D
Scalable
*U = Uppercase, L = Lowercase, D = Descenders
Font Matrices for 8 dot/mm (203 DPI) Print heads