Fujitsu 9400 ユーザーズマニュアル

3-16

Bar pasting

Metal staple

Rear stacker position for continuous forms

Notes:

1.

To prevent paper jams, avoid the following:

•

Bar-pasting that makes forms stiff.

•

Metal staples that cause forms to catch in the paper feed path.  The print head may also be damaged in

printing on staples.

2.

The raised fold of the top part at the perforation (fold) must be 1 mm (0.04 in) or less, with the bottom layer

flat as shown below.

3.

When using continuous forms, the rear stacker must be down as shown below.

1 mm (0.04 in.) or less

Bottom layer flat

Example:   3-part