Sharp AM-300 ユーザーズマニュアル

Messages and Signals

ADD PAPER

Check the paper. If the tray is empty, add paper. If 
there is paper in the tray, make sure it is inserted 
correctly (take out the stack, align the edges evenly, 
and then reinsert it in the tray). Printing will resume 
automatically when the output tray is replaced.

BYPASS MISFEED

The paper is not inserted correctly in the bypass tray. 
Remove the paper and insert it again.

BYPASS PAPER! /

IF COPY, PRESS 
(alternating messages)

Paper has been inserted in the bypass tray. If the 

paper has been inserted for a copy job, press 

 to 

set the paper size. If the paper is for a print job, the 
message can be disregarded.

CHK SCANNER LOCK /
PLS RETURN POWER
(alternating messages)

Make sure that the scanner lock  has been released 
(see page 15) and then unplug the power cord, wait 
at least 5 seconds, and plug it back in.

COVER OPEN

One or both of the print compartment covers are 
open. Make sure both covers are closed.

DOCUMENT JAMMED

The original document is jammed. See the following 
section, Clearing Paper Jams. Document jams will 
occur if you load more than 20 pages at once or load 
documents that are too thick (see page 65). The 
document may also jam if the receiving machine doesn’t 
respond properly when you attempt to send a fax.

DOCUMENT READY

A document has been  inserted in the auto document 
feeder and the machine is waiting for you to begin 
faxing or copying.

DRUM LIFE OVER

This appears when the drum cartridge needs 
replacement.